8011 Aluminum Sheet for Cap

Cureent Position:HOME/Alloy Cap/8011 Aluminum Sheet for Cap/

8011 aluminium sheet for PP cap ROPP cap

Author: frank   Time:2016-04-26   Source:Original

8011 aluminium sheet for PP cap ROPP cap

Alloy Temper :8011 H14..

Lead Time :30 days.

Thickness :0.17-0.23mm.

Product Detail

8011 aluminium sheet for PP cap ROPP cap
8011  aluminium lacquered sheet for PP cap ROPP cap
Alloy: 8011 
Temper: H14 
Thickness: 0.17-0.23mm 
Width: 800-1000mm  
Length: 600mm--1000mm 

Surface type: 
a. Plain mill finish aluminum strip
b. DOS oil lubricated finish
c. Chromated finish
d. One side golden/white/red/blue/black,etc other colored, other side protective lacquered 
e. both sides clear/transparent lacquered 
Test item: autoclave test, Hgcl2 test;
Tensile strength: 130-155mpa;
Elongation: 2.5-3.5%;
Earring: 2% Max;
Packing: export standard wooden boxes;
Application :
    ROPP cap, PP cap, roll on pilfer proof cap, aluminum pilfer-proof cap, pilfer proof closure, aluminum bottle cap, aluminum screw cap, tear off caps, flip off  caps.

Chemical Composition
Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Other Aluminum
Each Total
8011 0.4-0.8 0.5-1.0 0.1 0.1 0.1 0.1 - 0.1 0.05 0.05 0.15 Remainder
Temper Thickness mm Tensile Strength 
Rm MPa
Yield Strength 
Rp0.2 MPa
Elongation %
Bend Radius Hardness HBWa
H14  0.20-0.27 min. max. min. max.   180° 90°  
120 170 110   1     41
H16 0.20-0.27 160   145   1     50

Related Products :

  • Customer FAQRelease Time :2016-04-26 14:33:27

    Customer FAQ : Welcome to Signi Aluminium !...

If you have any question, please consult!

Name :
Contact :
Email :
Region :
Content :
contact us
Looking Forward to Your Response!





Email:[email protected]

Address:A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan