Current Position : Home/Alloy Cap/ 8011 aluminium plain lacquered strip

8011 aluminium plain lacquered strip

8011 aluminium plain lacquered strip

Alloy Temper :8011 H14..

Lead Time :30 days.

Thickness :0.17-0.23mm.

Detail


8011 aluminium plain strip, aluminium lacquered strip for Injection vial seals
 
Alloy: 8011 
Temper: H14 
Thickness: 0.17-0.23mm 
Width: 50-900mm 
Coil ID: 76mm 152mm 

 
Surface type: 
a. Plain mill finish aluminum strip;
b. DOS oil lubricated finish;
c. Chromated finish;
d. One side golden/white/red/blue/black,etc other colored, other side protective lacquered;
e. both sides clear/transparent lacquered;
 
Test item: autoclave test, Hgcl2 test 
Tensile strength: 130-155mpa
Elongation: 2.5-3.5%
Earring: 2% Max
Packing: export standard wooden boxes 
 
Application : vial aluminium seals, aluminium tear off seal, aluminium flip - off vial seals, aluminium closures, pharmaceutical caps, pull-off aluminum cap, aluminum seal cap for injection vial,aluminum cap for injection bottle.

Chemical Composition
Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Other Aluminum
Each Total
8011 0.4-0.8 0.5-1.0 0.1 0.1 0.1 0.1 - 0.1 0.05 0.05 0.15 Remainder
 
Temper Thickness mm Tensile Strength
 Rm MPa
Yield Strength
 Rp0.2 MPa
Elongation %
 A50mm
Bend Radius Hardness HBWa
H14  0.20-0.27 min. max. min. max.   180° 90°  
120 170 110   1     41
H16 0.20-0.27 160   145   1     50
 


CONTACT US
CONTACT US
Looking Forward to Your Response!

Mobile:86 17344894490

Email:frank@signialuminium.com

Address:A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan